Post Reply 
1,024 additional Registers on the CL
08-19-2016, 03:00 PM (This post was last modified: 08-23-2016 05:42 AM by Ángel Martin.)
Post: #51
RE: 1,024 additional Registers on the CL
Newsflash update - two more Y-Regs functions made it to the CLXMEM module: A<>YRG and ST<>YRG for a block-exchange of Y-registers with ALPHA or the Stack.

With these the module is complete, and all the Page Management functions are now gone (they were duplicates of the same functions in the PowerCL so not a big deal).

I've started to prepare the Y-applications ROM, mostly with Y-versions of all the block register functions from the PPC. So far the count is up to 30 of those...
It's easy to modify them, and the "data" is now in the expanded registers. But the choice of where to use the control registers from has two possibilities:

1. use the standard registers, as in the original routines. The advantage of this choice is you have 1,024 registers for the "data', all available.

2. use also expanded registers for the control. Here the advantage is you can run the routines with SIZE 000, at the cost of a few expanded registers for control parameters.

Preferences, anyone?

"To live or die by your own sword one must first learn to wield it aptly."
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: 1,024 additional Registers on the CL - Ángel Martin - 08-19-2016 03:00 PM

User(s) browsing this thread: 1 Guest(s)