(71b) Problem reading files from disc on 9114B

[Erwin]

(07-03-2016 04:07 PM)Jurgen Keller Wrote:  As I'm the seller and did a backup copy to my PC, I just tried to read some files. Here is the ILPer log:

Code:

>CAT ALL
  NAME   S TYPE   LEN    DATE    TIME PORT
workfile   BASIC     0 01/01/00 00:00 
>DEVID$(3)
HDRIVE1
>CAT :3
   NAME    S TYPE   LEN    DATE    TIME 
WBLEX        LEX    1008 01/10/00 23:47 
WB           BASIC  5692 01/10/00 23:47 
UTIL         BASIC  2714 01/10/00 23:48 
MACRO        BASIC   347 01/10/00 23:49 
LED          BASIC  1250 01/10/00 23:50 
PORTER       BASIC  1724 01/10/00 23:50 
FINDER       BASIC  2266 01/10/00 23:51 
SORTWB       BASIC  3012 01/10/00 23:52 
PRINTWB      BASIC  2187 01/10/00 23:54 
REPORT       BASIC  4272 01/10/00 23:55 
CHARSET      BASIC   266 01/10/00 23:57 
WBSAMPLE     DATA   2700 01/10/00 23:58 
DBSAMPLE     DATA   2064 01/11/00 00:00 
TXSAMPLE     TEXT   1792 01/11/00 00:02 
MENU         BASIC   836 01/11/00 00:04 
FCURSOR      LEX     120 01/11/00 00:06 
LOOP         BASIC   973 01/11/00 00:07 
UTIL2        LEX     923 01/11/00 00:08 
TED          BASIC  2079 01/11/00 00:11 
>COPY WB:3 TO WB
>CAT ALL
  NAME   S TYPE   LEN    DATE    TIME PORT
workfile   BASIC     0 01/01/00 00:00 
WB         BASIC  5692 01/01/00 00:02 
>COPY WBLEX:3
>VER$
HP71:1BBBB WB:D HPIL:1A

So I could load the WB BASIC file and also the WBLEX LEX file properly. I guess there's something wrong with your hardware.

Hallo,

thank you all for your support. It looks like it was my fault. Cause the Disk had no name it is only possible to do this with the number in the HPIL-Line.

Code:

CAT:1
COPY WBLEX:1

So I get the files in the HP71. I didn't think about this, cause all my discs have names. Problem solved, failure from the 30 cm in front of the calculator - thank you all very much for your help.

On the other hand I'm curios why it was not possible to copy it with the LIFUTIL in a proper way - would be great to make this running. It looks like, there is something to do in the preferences for HPIL-Header?

I have the PIL-Box too, but couldn't get it running now. It looks like there is a problem with the USB-Port Mapping to the internal RS232 on my Laptop with WIN98. But in this case I have to dig a little deeper.

best regards from Vienna
Erwin