Search
Member List
Calendar
Help
|
Wanted: HP-46 or 81 Printer
|
|
05-17-2016, 06:26 AM
(This post was last modified: 05-17-2016 06:28 AM by Duane Hess.)
Post: #2
|
|||
|
|||
|
RE: Wanted: HP-46 or 81 Printer
Please let me know if you find anything.
I assume the gear for the EP-102 is module 0.4 with 17/68 teeth, 3mm bore, 7mm total thickness, large outger gear 3mm thick. I'm contemplating getting two separate gears (spur gears w/o hub) and epoxying them together. However, the smallest bore that I've located for the larger gear is 4mm. Can't seem to find a 4mm OD/3mm ID bushing. thanks ** i.e. if you find a gear source that is. (unless you find a surplus pile of EP-102 printers!) |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Wanted: HP-46 or 81 Printer - aj04062 - 03-19-2016, 06:39 PM
RE: Wanted: HP-46 or 81 Printer - Duane Hess - 05-17-2016 06:26 AM
RE: Wanted: HP-46 or 81 Printer - damaltor - 05-17-2016, 08:11 AM
RE: Wanted: HP-46 or 81 Printer - Duane Hess - 05-17-2016, 09:52 PM
RE: Wanted: HP-46 or 81 Printer - damaltor - 05-18-2016, 05:57 AM
|
User(s) browsing this thread: 1 Guest(s)