Post Reply 
RPN Scientific Firmware for the Spikenzielabs Calculator Kit
10-29-2016, 11:09 PM (This post was last modified: 10-30-2016 09:49 PM by Luigi Vampa.)
Post: #17
RE: RPN Scientific Firmware for the Spikenzielabs Calculator Kit
(03-01-2016 12:53 PM)securd Wrote:  Regarding the programmer, I am using one based on the CP2102 USB chip with a 6-pin wire connector
I have used a Prolific PL2303 USB chip, that I have for my WP34s, but the lack of DTR signal has made any sketch upload simply impossible. I happened to find this link describing the issue in a quite clear way.
BTW, I needed to comment the #include <MemoryFree.h> line, in order to be able to compile the sketch with no errors.
I am sure I will enjoy your RPN sketch as soon as I got my proper USB2TTL converter. Thanks Steve for sharing your project.

Saludos Saluti Cordialement Cumprimentos MfG BR + + + + +
Luigi Vampa +
Free42 HuaweiP10 '<3' I + + +
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RPN Scientific Firmware for the Spikenzielabs Calculator Kit - Luigi Vampa - 10-29-2016 11:09 PM



User(s) browsing this thread: 1 Guest(s)