Post Reply 
Is the 12C SDK still available?
11-23-2015, 12:22 AM
Post: #31
RE: Is the 12C SDK still available?
(11-22-2015 10:08 PM)rprosperi Wrote:  
(11-22-2015 08:45 PM)Katie Wasserman Wrote:  It's not JTAG just some crazy thing the HP came up with for these calculators.

Anyway, the cable I have for the USB version is just a hacked up one for the serial version. It should be possible to modify the old cable by adding a DPDT switch and a USB connector so that it would work for both calculator versions, as only 2 pins need to switch.

We're talking about the same cable as one uses for updating the WP-34S (or 20b/30b/12c+/15c+) right?

DPDT switch?

Right.

The DPDT (double-pole, double-throw) switch would be needed to swap the both data lines between the USB interface and the existing RS232 level converter. I don't think that there is enough room inside that little black shell for such a switch, so it might require some repackaging.

-katie

Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Is the 12C SDK still available? - emece67 - 11-20-2015, 09:59 PM
RE: Is the 12C SDK still available? - Katie Wasserman - 11-23-2015 12:22 AM
RE: Is the 12C SDK still available? - d b - 11-25-2015, 11:52 PM
RE: Is the 12C SDK still available? - Dol - 09-06-2016, 07:11 PM
RE: Is the 12C SDK still available? - dls - 03-06-2022, 12:57 PM



User(s) browsing this thread: 1 Guest(s)