News from Swissmicros!

[Harald]

(11-16-2015 01:33 PM)Harald Wrote:  

(11-13-2015 10:50 PM)Harald Wrote:  I received mine today. I pushed the metal dome buttons and it seems a lot better now.
But unfortunately the DM15 is at work and I will have to wait until Monday before I can install the new PCB. :-(

It is Monday, I am back at work and have used my lunchbreak to install the new PCB.

This is a significant improvement! (Although in my opinion still not quite as good as the original 15C.)
But I have to say I am happy with the keyboard now. Well, at least theoretically - my specimen seams to have some contamination under the "3" and the "0" dome. At first I had to press them fairly hard to get the key to register. This has improved with a little use, but I'll have to wait and see if the problem disappears completly.

Thanks for shipping the updated PCB! Customer support like that is quite rare these days!

Ok, another update. The "0" problem resolved itself after pressing the button a couple of times. The "3" problem remained. I contacted Michael and got the go ahead from him to peal off the foil and stick it back on. So I did, cleaned the contact surface and now I have a perfectly working DM15L.

Thanks a lot for this brilliant calculator SwissMicros!