Post Reply 
HP 3468 voltmeter with HP-IL
06-15-2015, 10:11 AM (This post was last modified: 06-15-2015 10:15 AM by isanchez.)
Post: #12
RE: HP 3468 voltmeter with HP-IL
Hi,
thanks for your answer...
I have read you have to calibrate many variables: ohm, amp, voltage, with different rates or levels...the thing is if it must be done all at one time...or it can be partially done and be re-taken afterwards...(i.e. can I calibrate the resistance and store it, and afterwards callibrate the voltages or intensities?)
Sorry, English is not my native tongue, so maybe I am not expessing myself clearly or, maybe, I don't understand well the calibration process explained in the Service manual.

I have the following equipment required: int/voltage regulable source, multimetre, (access to the resistors proposed in the manual)...maybe something missing? I have just made a first light read of the Service Manual.

Again, thanks for your help.

Kind regards

Ignacio
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 3468 voltmeter with HP-IL - 4ster - 06-11-2015, 03:24 PM
RE: HP 3468 voltmeter with HP-IL - 4ster - 06-11-2015, 04:14 PM
RE: HP 3468 voltmeter with HP-IL - 4ster - 06-16-2015, 02:06 AM
RE: HP 3468 voltmeter with HP-IL - 4ster - 06-16-2015, 05:11 AM
RE: HP 3468 voltmeter with HP-IL - 4ster - 06-17-2015, 04:01 AM
RE: HP 3468 voltmeter with HP-IL - isanchez - 06-15-2015 10:11 AM
RE: HP 3468 voltmeter with HP-IL - 4ster - 08-17-2015, 03:06 PM
RE: HP 3468 voltmeter with HP-IL - 4ster - 08-18-2015, 02:34 PM
RE: HP 3468 voltmeter with HP-IL - 4ster - 08-19-2015, 04:06 AM



User(s) browsing this thread: 2 Guest(s)