TI-59 Emulator

[Marcus von Cube]

(06-13-2014 01:58 PM)HrastProgrammer Wrote:  No, it is not "non working error blink" but error state for division by zero in this case.

Press CE to clear the error state (blinking) without clearing display register. Press CLR to clear error state and display register (and pending operations etc.)

Yes I know. What I see is just not the normal blink frequency but a very rapidly flashing display. So there must be an issue with the timing here. That had lent me to the misinterpretation of a running program.

May I start a wish list?

1. A menu with a settings dialog so you can set the speed and other settings here

2. Loading of modules. 2nd PGM 01 SBR CLR seems to work to clear the summation registers. Is the standard software module completely implemented?

3. Show labels for the softkeys A to E´ (automatically if a module is active)

4. Write/Load programs and data to "magnetic cards". As an alternative: Allow the selection of the RAM file from a menu.

5. Document the keyboard mapping. A to E and UP/DOWN work as expected and SPACE seems to be mapped to R/S. What about the rest?