Post Reply 
WP34s flashing procedure
02-26-2015, 11:17 PM
Post: #8
RE: WP34s flashing procedure
(02-26-2015 11:09 PM)rprosperi Wrote:  Dieter - look here - this shows the port, but you can easily understand the corresponding cable pins

Thank you. I now see the pinout is also mentioned in the manual (p. 203 in edition 3.2). Now, if the ERASE button actually doesn't work (haven't tested this yet), is there another way to get the firmware into the 20b? Otherwise the cable seems to be fine: updates are no problem and the RESET button seems to work.

Dieter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34s flashing procedure - Dieter - 02-26-2015, 08:10 PM
RE: WP34s flashing procedure - Dieter - 02-26-2015, 10:35 PM
RE: WP34s flashing procedure - Dieter - 02-26-2015, 11:05 PM
RE: WP34s flashing procedure - rprosperi - 02-26-2015, 11:09 PM
RE: WP34s flashing procedure - Dieter - 02-26-2015 11:17 PM
RE: WP34s flashing procedure - rprosperi - 02-26-2015, 11:21 PM
RE: WP34s flashing procedure - John Galt - 02-27-2015, 02:00 AM
RE: WP34s flashing procedure - Dieter - 02-27-2015, 06:51 AM
RE: WP34s flashing procedure - BarryMead - 02-27-2015, 03:49 AM
RE: WP34s flashing procedure - walter b - 02-27-2015, 03:25 AM
RE: WP34s flashing procedure - Dieter - 02-27-2015, 07:12 AM
RE: WP34s flashing procedure - walter b - 02-27-2015, 08:22 AM
RE: WP34s flashing procedure - Dieter - 02-27-2015, 07:35 PM
RE: WP34s flashing procedure - John Galt - 02-27-2015, 08:05 PM
RE: WP34s flashing procedure - Dieter - 03-01-2015, 04:26 PM
RE: WP34s flashing procedure - Dieter - 03-01-2015, 09:15 PM
RE: WP34s flashing procedure - Dieter - 03-01-2015, 09:49 PM



User(s) browsing this thread: 1 Guest(s)