Post Reply 
HP 75
03-04-2015, 03:39 PM
Post: #16
RE: HP 75
(03-04-2015 03:15 PM)TASP Wrote:  If the platen advances and the cartridge goes side to side, and there is no ink deposited no matter what cartridge is installed implies an electrical problem such as Garth noted.

If the contacts are OK, then it is further upstream; cabling, or driver electronics.

Leaking ink and over-cleaning destroyed the contacts on the flex cable on my 2225B. Luckily I found a cheap printer on eBay with a good cable.

Adam and Paul shared their experiences in this post.

If it's not the cable, then yes, it's the electronics, but it's probably the cable.

You might like to check out the Service Manual.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 75 - John W Kercheval - 02-14-2015, 12:57 PM
RE: HP 75 - Sylvain Cote - 02-14-2015, 02:37 PM
RE: HP 75 - John W Kercheval - 02-14-2015, 02:44 PM
RE: HP 75 - Sylvain Cote - 02-15-2015, 02:10 PM
RE: HP 75 - rprosperi - 02-15-2015, 03:50 PM
RE: HP 75 - Sylvain Cote - 02-15-2015, 05:32 PM
RE: HP 75 - John W Kercheval - 02-15-2015, 03:12 PM
RE: HP 75 - TASP - 03-04-2015, 01:18 AM
RE: HP 75 - Dave Frederickson - 03-04-2015, 01:40 AM
RE: HP 75 - TASP - 03-04-2015, 03:04 AM
RE: HP 75 - Dave Frederickson - 03-04-2015, 03:15 AM
RE: HP 75 - TASP - 03-04-2015, 05:00 AM
RE: HP 75 - Garth Wilson - 03-04-2015, 06:35 AM
RE: HP 75 - Paul Berger (Canada) - 03-04-2015, 12:33 PM
RE: HP 75 - TASP - 03-04-2015, 03:15 PM
RE: HP 75 - Dave Frederickson - 03-04-2015 03:39 PM
RE: HP 75 - TASP - 03-04-2015, 04:35 PM
RE: HP 75 - Garth Wilson - 03-04-2015, 08:02 PM
RE: HP 75 - TASP - 03-04-2015, 09:05 PM
RE: HP 75 - Dave Frederickson - 03-04-2015, 09:30 PM



User(s) browsing this thread: 1 Guest(s)