Post Reply 
[WP-34S] Cable and flashing options for Mac users
01-24-2015, 06:11 PM (This post was last modified: 01-24-2015 06:21 PM by Dave Frederickson.)
Post: #89
RE: [WP-34S] Cable and flashing options for Mac users
(01-24-2015 05:09 PM)jebem Wrote:  - I don't know how much a Harald's board cost.

From the original post:
And now (I hope this is OK on here, please remove if not) the prices. All prices include shipping within Germany, the rest of Europe will be 50 cents extra, the rest of the world +1 Euro:

Basic Flash Adaptor (without IR and USB power): 12.50 Euros

Flash Adaptor with USB-power and IR printing (including IR diode): 13.50 Euros

Flash adaptor with Li-Ion handling: 15.00 Euros

HP cable conversion kit: 13.00 Euros

And a few extras you might or might not need:

Crystal and Caps: 0.25 Euros
60mAh Li-Ion battery: 4.60 Euros
micro USB cable: 2.00 Euros

From a year ago:
The USB power and IR printing version is still available at 14.50 Euros including shipping, crystal and caps are 25 cents extra.
Alternatively I have a board to make a DIY flash cable (you will have to make your own connector to plug into the calculator) at 13.50 Euros.

Bear in mind that those prices included shipping to the U.S.

All you had to do was ask.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [WP-34S] Cable and flashing options for Mac users - Dave Frederickson - 01-24-2015 06:11 PM

User(s) browsing this thread: 1 Guest(s)