Post Reply 
[WP-34S] Cable and flashing options for Mac users
01-23-2015, 08:08 AM (This post was last modified: 01-23-2015 08:12 AM by jebem.)
Post: #67
RE: [WP-34S] Cable and flashing options for Mac users
(01-23-2015 01:17 AM)John Galt Wrote:  ... and on the 999th time: success!
Although I followed Jose's schematic, the cable I used is evidently opposite from his (and Jonathan's). My "white" has to go to J35 and "green" to J33. Out of curiosity I swapped Tx and Rx earlier in testing, but other factors probably prevented its success then.

Congratulations!
Thank you for the information on that Chinese USB-to-TTL-serial adapters variants.
I have updated my diagram accordingly, by removing the color schema references.

Just for the record, here are some pictures of my cables (a have a bunch of them acquired from two different eBay suppliers) and all of them uses the same color schema.
So I wrongly assumed all of the other possible manufacturers were using the same color schema. What was i thinking? Smile

[Image: Prolific%2BUSB-to-Serial%2BComm%2B%2Btop.JPG] [Image: Prolific%2BUSB-to-Serial%2BComm%2Bbottom.JPG]

P.S. - Edited to remove the extra pictures added initially by mistake.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [WP-34S] Cable and flashing options for Mac users - jebem - 01-23-2015 08:08 AM



User(s) browsing this thread: 1 Guest(s)