Post Reply 
Prime Totally Hangs
09-23-2014, 04:11 PM
Post: #1
Prime Totally Hangs
I'm curious if anybody else experienced serious freezes (with the current firmware).

Last night, my unit wouldn't switch over to CAS mode anymore - - hit the CAS button, and the hourglass came on. Neither On-Symb, nor On-Esc-Apps worked, and the Prime didn't turn off.

A paperclip reset did the job - - however, all my CAS programs are gone, also functions stored with "Define", all global variables, custom apps, and Home and CAS settings - - gone. PPL programs, however, are unaffected.

I believe that memory was corrupted, perhaps because the three "recursive" settings in the CAS settings (2nd page) have default values which are too low; but that is only a hunch. I set them to higher values (50), and so far, touch wood!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Prime Totally Hangs - Helge Gabert - 09-23-2014 04:11 PM
RE: Prime Totally Hangs - Han - 09-23-2014, 04:31 PM
RE: Prime Totally Hangs - Helge Gabert - 09-23-2014, 04:41 PM
RE: Prime Totally Hangs - Han - 09-23-2014, 07:10 PM
RE: Prime Totally Hangs - Helge Gabert - 09-23-2014, 08:05 PM
RE: Prime Totally Hangs - Tim Wessman - 09-23-2014, 08:51 PM
RE: Prime Totally Hangs - Helge Gabert - 09-23-2014, 09:24 PM
RE: Prime Totally Hangs - Joe Horn - 09-26-2014, 10:41 PM
RE: Prime Totally Hangs - parisse - 09-24-2014, 07:25 AM
RE: Prime Totally Hangs - Alberto Candel - 09-26-2014, 08:32 PM
RE: Prime Totally Hangs - Helge Gabert - 09-24-2014, 02:29 PM
RE: Prime Totally Hangs - Helge Gabert - 09-27-2014, 01:14 AM



User(s) browsing this thread: 1 Guest(s)