Post Reply 
HP-71B Startup Time - ROM Differences
09-09-2014, 01:52 AM
Post: #4
RE: HP-71B Startup Time - ROM Differences
(09-09-2014 12:05 AM)Geoff Quickfall Wrote:  I know you said off io when loop is not connected.

I have the same version with 3; 32k modules and the math. Startup is almost instant to the cursor and is the same on my other 5 machines of differing versions.

Have you tried executing the OFF IO command, then check the startup. IO can be on even when a loop is NONEXISTANT and mine then exhibits the slow start if I had not selected OFF IO after using the tape deck, ink jet printer, disc drive...

Geoff

Yes, I checked this, however will do so again. Of course I can't tell if it makes a difference until tomorrow, as shortly after shutdown it always comes right back on as noted.

Maybe you're right and I just spaced out on the IO OFF. Will know in the morning..

Thanks Geoff.

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-71B Startup Time - ROM Differences - rprosperi - 09-09-2014 01:52 AM



User(s) browsing this thread: