Post Reply 
Sob
07-20-2022, 02:30 PM (This post was last modified: 07-20-2022 02:39 PM by tangdfx.)
Post: #28
RE: Sob
Sorry everyone.

It is my mistake due to misleading by the overlay.

The overlay exchange the PMT and PV button.

This is the root cause.

But anyway. There is another bug in the hardware of Multi Calc and Harald board.

Every time when you choose the model HP38C it will show Pr error.

This bug cause the continue memory can not be used.

HP35 HP45 HP55 HP65 HP67 HP21 HP25 HP29C HP19C HP97 HP10C HP11C HP12C HP15C HP16C HP31E HP32E HP33E HP33C HP34C HP37E HP38E HP38C HP41
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sob - teenix - 07-12-2022, 06:36 AM
RE: Sob - Paul Dale - 07-12-2022, 10:33 AM
RE: Sob - DrewNicholson - 07-12-2022, 10:42 AM
RE: Sob - rprosperi - 07-12-2022, 12:23 PM
RE: Sob - teenix - 07-13-2022, 12:56 AM
RE: Sob - tangdfx - 07-12-2022, 12:28 PM
RE: Sob - james summers - 07-12-2022, 04:57 PM
RE: Sob - james summers - 07-12-2022, 05:58 PM
RE: Sob - rprosperi - 07-13-2022, 03:22 AM
RE: Sob - Marcovecchio - 07-15-2022, 11:16 AM
RE: Sob - teenix - 07-15-2022, 01:53 PM
RE: Sob - Bill (Smithville NJ) - 07-15-2022, 03:02 PM
RE: Sob - Sukiari - 07-15-2022, 03:33 PM
RE: Sob - teenix - 07-16-2022, 12:20 AM
RE: Sob - Sukiari - 07-16-2022, 12:44 AM
RE: Sob - tangdfx - 07-16-2022, 12:16 PM
RE: Sob - teenix - 07-17-2022, 12:51 AM
RE: Sob - tangdfx - 07-17-2022, 05:03 AM
RE: Sob - teenix - 07-17-2022, 09:33 AM
RE: Sob - teenix - 07-18-2022, 12:50 PM
RE: Sob - tangdfx - 07-18-2022, 03:21 PM
RE: Sob - teenix - 07-18-2022, 10:19 PM
RE: Sob - rprosperi - 07-19-2022, 12:27 AM
RE: Sob - tangdfx - 07-19-2022, 12:31 AM
RE: TVM (was sob) - Mike T. - 07-19-2022, 10:08 PM
RE: Sob - teenix - 07-19-2022, 01:21 AM
RE: Sob - tangdfx - 07-20-2022, 02:56 AM
RE: Sob - Mike T. - 07-20-2022, 11:09 PM
RE: Sob - tangdfx - 07-20-2022 02:30 PM
RE: Sob - teenix - 07-20-2022, 07:53 PM



User(s) browsing this thread: