Post Reply 
HP41: how to use "Solve" from Math module in another programm?
08-25-2021, 04:06 PM (This post was last modified: 08-26-2021 08:27 AM by floppy.)
Post: #3
RE: HP41: how to use "Solve" from Math module in another programm?
(08-25-2021 03:50 PM)BillBee Wrote:  Did you check out Appendix B for calling "SOL" as a sub? Page 59.
Ah. Obviously not. Understood now. Thanks a lot. See the result below.
The reverse gamma "IGAM00" works "a bit": takes much of time. I will have to find a better one.
(reverse gamma "IGAM00" is for the area positive x between 0.0001 and the minimum at approx 1.461)
Quote:LBL "IGAM00"
STO 07
0.0001
STO 01
1.461
STO 02
"ZWFF"
ASTO 06
XEQ "SOL"
RTN
LBL "ZWFF"
XEQ "GAMMA"
RCL 07
-
RTN
END

in other area for example for x> 1.461 (see from page 27) there are more precise approximations
https://ir.lib.uwo.ca/cgi/viewcontent.cg...ontext=etd

HP71 & Multimod, HP41CV/CX & Nov64d, PILBOX, HP-IL-PRINTER 82162A, RS232 HP-IL interface, Debian11 64bits-PC w/ pyILPER, V41R9F & EMU71
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP41: how to use "Solve" from Math module in another programm? - floppy - 08-25-2021 04:06 PM



User(s) browsing this thread: 1 Guest(s)