Hardware Voyager Emulator

[agarza]

(09-01-2021 07:23 AM)johanw Wrote:  

(08-31-2021 11:57 PM)agarza Wrote:  Next week there should be kits available for the HP15c and HP16c. (you can load either firmware, the only difference is the key names on the PCB)

Is it delivered "bare" as is shown there, or with the white 3D printed box and film keypad shown on the picture on page 2 of this discussion?

It is delivered "bare". (All parts except the 3d case)

The 3d printed case files can be downloaded from thingverse.

The 3d case was modeled using FreeCAD. And you can modify the source to suit your needs.

You can print the key overlay on acetate sheets (the ones used for overhead projectors) or on vinyl stickers.