newRPL - Updated to build 1510 [official build remains at 1487]

[spiff72]

(07-02-2022 05:27 PM)Chr Yoko Wrote:  

(06-19-2022 05:10 AM)Claudio L. Wrote:  We are well aware of this: it only happens if you turn the display off and back on quickly. The solution is to turn the calc off, wait 2 seconds or more, then turn it back on. We haven't been able to pinpoint the issue but it seems that when you turn off and back on quickly the LCD driver chip starts from a corrupted state. So far the only solution found was to slow down the off/on sequence, but we want newRPL to be instantaneous when you press the On key (unlike the PrimeOS, which will make you wait a short second), so slowing down is NOT a valid solution hence not implemented.

Just got a Prime G1 rev C, installed newRPL and have the same screen flickering issue as above.
Waiting minutes before restart does not help with mine.
Only fix i found is to reset the calculator that brings me back to HP system and memory lost on newRPL.
Is there any work around that issue ?

I find that turning it of by using Esc(hold) + On to turn off, and waiting 5-10 seconds generally works. Sometimes it doesn't, but I just try again, and evenutally I can get it back. I haven't had to reset after the flickering screen since I found the key combo for turning off.