newRPL - Updated to build 1510 [official build remains at 1487]

[Alejandro Paz(Germany)]

Hei, I'd like to give it (finally) a try using a 39gs. My question is how should I strip the binary (newrpl39.bin) so I can flash it using a jlink (I "added" a jtag connector to my 39gs).
I would like to try with the connectivity kit but that never worked.
Alternatively I could try to flash from linux, is that possible ? The 39gs has a standard ROM.

I think that an "enable flash erase" or so maybe needed (besides the normal enable programming on flash devices):

Code:


J-Link>mem8 0, 16
00000000 = 06 00 00 EA 3F 00 00 EA 45 00 00 EA 4B 00 00 EA
00000010 = 51 00 00 EA FE FF
J-Link>loadfile d:\temp\newrpl39_stripped.bin
No address passed for .bin file. Assuming address: 0x0
Downloading file [d:\temp\newrpl39_stripped.bin]...
Writing target memory failed.
J-Link>

But maybe it is just that the jlink doesn't identify the flash chip attached to the arm9... I'll try to read a bit more on how to use it.

Any help appreciated

Thanks in advance,
Ale