Post Reply 
Prime does not turn on after charging
08-13-2019, 11:11 AM
Post: #9
RE: Prime does not turn on after charging
(08-12-2019 04:58 PM)Jean-Baptiste Boric Wrote:  
(08-12-2019 03:34 PM)olr Wrote:  However i did not remove the upper PCB. If that is necessary, i would need more detailed instructions as just removing all visible screws does not make it fall apart.

I advise you NOT to attempt removing the motherboard. It is glued pretty strongly to the back of the screen and there's nothing interesting back there for troubleshooting.

Assuming this is a G1, there should be a UART_TX pad on the motherboard. I haven't done this in a long time, but you can try connecting to it (3.3v TTL, 115200 bauds, 8 bits, no parity) and see if there's a boot log transmitted upon reset.

Have they removed the UART pad from the G2?

Tom L

Tom L
Cui bono?
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
Try a different cable - striegel - 08-11-2019, 02:02 PM
RE: Prime does not turn on after charging - toml_12953 - 08-13-2019 11:11 AM

User(s) browsing this thread: 1 Guest(s)