HP Forums / HP Calculators (and very old HP Computers) / General Forum v / [HP-41CL] Time Module Implant

Post Reply 
[HP-41CL] Time Module Implant
01-03-2014, 01:26 AM (This post was last modified: 01-03-2014 01:26 AM by Garth Wilson.)
Post: #6
Garth Wilson Offline
Senior Member
 		Posts: 597
Joined: Dec 2013
RE: [HP-41CL] Time Module Implant
(01-02-2014 11:52 PM)Monte Dalrymple Wrote:  Please be very careful when soldering to the vias. Use the minimum amount of time with the heat applied and the minimum amount of solder. The latest boards (version 4) include solder points on the top of the board for this purpose.

What is the potential failure mechanism? I have designed many very dense multilayer boards for production and never heard of such a problem.
http://WilsonMinesCo.com (Lots of HP-41 links at the bottom of the links page, http://wilsonminesco.com/links.html )
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [HP-41CL] Time Module Implant - Garth Wilson - 01-03-2014 01:26 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication