Way to connect 50g to 48?
|
05-11-2014, 10:11 AM
(This post was last modified: 05-11-2014 10:19 AM by Marcus von Cube.)
Post: #9
|
|||
|
|||
RE: Way to connect 50g to 48?
(05-11-2014 09:32 AM)Michael Lopez Wrote: The cable you need to purchase is the one called: "HP 50g RS-232 Serial Cable". Then you plug the old standard HP48 serial cable (HP type or other) into the 9 pin D-Plug end of this new cable resulting in suitable connections at both ends for the HP50G & HP48 series calculators.Are you sure you can just plug them together? If both are targeted at a PC com port you'll need a null modem with two 9 pin male connectors as an adapter. EDIT: I stand corrected! Here is the description of Eric's cable: Quote:Our cable has a standard male 9-pin connector for connecting directly to serial devices with no gender changer needed. While it is possible to connect it to a computer by using a null modem adapter, we feel that most users would prefer to use a USB cable for a PC link, allowing us to not need an adapter when connecting to serial devices.So no null modem required. Marcus von Cube Wehrheim, Germany http://www.mvcsys.de http://wp34s.sf.net http://mvcsys.de/doc/basic-compare.html |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Way to connect 50g to 48? - HP67 - 05-09-2014, 03:12 PM
RE: Way to connect 50g to 48? - Egan Ford - 05-09-2014, 05:25 PM
RE: Way to connect 50g to 48? - walter b - 05-09-2014, 05:29 PM
RE: Way to connect 50g to 48? - Marcus von Cube - 05-10-2014, 06:43 PM
RE: Way to connect 50g to 48? - HP67 - 05-11-2014, 05:51 AM
RE: Way to connect 50g to 48? - Michael Lopez - 05-11-2014, 01:49 AM
RE: Way to connect 50g to 48? - Michael Lopez - 05-11-2014, 09:32 AM
RE: Way to connect 50g to 48? - Marcus von Cube - 05-11-2014 10:11 AM
RE: Way to connect 50g to 48? - HP67 - 05-11-2014, 09:39 AM
RE: Way to connect 50g to 48? - HP67 - 05-11-2014, 10:17 AM
RE: Way to connect 50g to 48? - Michael Lopez - 05-11-2014, 12:29 PM
RE: Way to connect 50g to 48? - HP67 - 05-11-2014, 12:48 PM
|
User(s) browsing this thread: 1 Guest(s)