modules with duplicate labels (Aviation and Navigation)
|
05-06-2014, 04:47 AM
Post: #2
|
|||
|
|||
RE: modules with duplicate labels (Aviation and Navigation)
Hello Todd,
When both modules are plugging in, the 41 will always choose the label of the lowest port number. One way to solve this, is to ... 01) power off the calculator 02) remove the aviation module if present and insert the navigation module 03) power on the calculator 04) ASN "*T" to eˆx -> XROM 14,34 to key -15 (or to any other key) 05) power off the calculator 06) remove the navigation module and insert the aviation module 07) power on the calculator 08) ASN "*T" to 10ˆx -> XROM 19,21 to key -14 (or to any other key) 09) power off the calculator 10) insert both modules 11) power on the calculator 12) activate USER MODE now you can execute both labels any time you want through those two keys. There are also several other ways to do this with synthetic programming, PPC ROM, CCD, a small program, etc. Sylvain |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
modules with duplicate labels (Aviation and Navigation) - twdeckard - 05-06-2014, 04:01 AM
RE: modules with duplicate labels (Aviation and Navigation) - Sylvain Cote - 05-06-2014 04:47 AM
RE: modules with duplicate labels (Aviation and Navigation) - twdeckard - 05-27-2014, 03:48 AM
RE: modules with duplicate labels (Aviation and Navigation) - Ángel Martin - 05-27-2014, 06:01 AM
RE: modules with duplicate labels (Aviation and Navigation) - Sylvain Cote - 05-27-2014, 05:41 AM
RE: modules with duplicate labels (Aviation and Navigation) - twdeckard - 05-28-2014, 02:58 AM
RE: modules with duplicate labels (Aviation and Navigation) - rprosperi - 05-28-2014, 04:05 AM
RE: modules with duplicate labels (Aviation and Navigation) - Sylvain Cote - 05-28-2014, 03:55 AM
|
User(s) browsing this thread: 1 Guest(s)