Post Reply 
Sharp PC-1500A with CE-150
03-02-2019, 12:21 AM
Post: #18
RE: Sharp PC-1500A with CE-150
(02-28-2019 07:19 PM)J-F Garnier Wrote:  Actually, I designed a HPIL-Centronics plotter interface with HPGL support exactly for the purpose of using the CGP with the Plotter ROM.
The interface was produced and sold by the Kristal company in 1985.
Bonjour Jean-Fran├žois,
Very little is said in the article on the hardware implementation side.
Did you use the 82166A or use the parts that was included in the 86166C for the HP-IL side ?
Did you use an Intel 8051 MCU to implement the HP-GL logic handler ?
Do you still have board available ?
Sylvain
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sharp PC-1500A with CE-150 - Leviset - 02-09-2019, 09:19 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-22-2019, 03:48 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:06 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-22-2019, 01:58 PM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:09 AM
RE: Sharp PC-1500A with CE-150 - Xorand - 02-23-2019, 06:19 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-27-2019, 11:05 AM
RE: Sharp PC-1500A with CE-150 - rprosperi - 02-27-2019, 01:42 PM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-27-2019, 02:15 PM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 02-28-2019, 10:19 AM
RE: Sharp PC-1500A with CE-150 - Sylvain Cote - 03-02-2019 12:21 AM
RE: Sharp PC-1500A with CE-150 - rprosperi - 03-02-2019, 01:29 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 03-06-2019, 01:47 PM
RE: Sharp PC-1500A with CE-150 - Xorand - 03-11-2019, 01:13 AM
RE: Sharp PC-1500A with CE-150 - GVHOVE - 03-07-2019, 01:21 AM



User(s) browsing this thread: 1 Guest(s)