Post Reply 
HP48 Character Bitmaps
11-07-2018, 06:11 AM
Post: #2
RE: HP48 Character Bitmaps
Hello,

My memory of these times is waning... So I do not even remember if there is such a set of characters on the 48 (I assume you mean the original 48S/G)...
What you can do easely however, is to use the ->GROB function to generate a graphic that will contain the full font.
Each character is 6*8 pixels, so you need to loop for A from 32 to 255 (characters before 32 are not defined). and display the result in PICT or in a larger grob for storage.

Cyrille

Although I work for the HP calculator group, the views and opinions I post here are my own. I do not speak for HP.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP48 Character Bitmaps - TomC - 11-07-2018, 04:23 AM
RE: HP48 Character Bitmaps - cyrille de brébisson - 11-07-2018 06:11 AM
RE: HP48 Character Bitmaps - Chris Dreher - 11-07-2018, 06:19 AM
RE: HP48 Character Bitmaps - TomC - 11-07-2018, 08:56 PM
RE: HP48 Character Bitmaps - EugeneNine - 11-07-2018, 10:50 PM
RE: HP48 Character Bitmaps - acoto - 11-08-2018, 01:12 AM
RE: HP48 Character Bitmaps - DavidM - 11-08-2018, 03:06 PM
RE: HP48 Character Bitmaps - TomC - 11-08-2018, 06:41 PM
RE: HP48 Character Bitmaps - DavidM - 11-08-2018, 06:51 PM
RE: HP48 Character Bitmaps - TomC - 11-09-2018, 06:55 AM



User(s) browsing this thread: 1 Guest(s)