[VA] SRC#001 - Spiky Integral

[John Keith]

(07-15-2018 07:53 PM)DavidM Wrote:  Gerson's method above is also how I would do it if the ListExt library isn't available.

Using the ListExt library:

« 0 m LMRPT »

Creating a list of 1000 0s with the CON method: 0.77s
Creating the same list with the ListExt command: 0.07s

Either should give reasonable performance in this scenario.

Or equivalently, using only built-in commands:

<< 0 m NDUPN ->LIST >>