HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / Longer HP-IL cable runs

Post Reply 
Longer HP-IL cable runs
02-16-2018, 05:15 PM
Post: #2
Paul Berger (Canada) Offline
Senior Member
 		Posts: 546
Joined: Dec 2013
RE: Longer HP-IL cable runs
HPIL uses differential signalling so while data only travels in one direction, both wires are required. The manual "The HP-IL Interface Specification" 82166-90017, available on the MoHPC manual collection, gives all the details about suitable cables.

Paul.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Longer HP-IL cable runs - 4ster - 02-16-2018, 04:34 PM
RE: Longer HP-IL cable runs - Paul Berger (Canada) - 02-16-2018 05:15 PM
RE: Longer HP-IL cable runs - Sylvain Cote - 02-16-2018, 05:36 PM
RE: Longer HP-IL cable runs - Howard Owen - 02-20-2018, 11:50 PM
RE: Longer HP-IL cable runs - Harald - 02-21-2018, 10:01 AM
RE: Longer HP-IL cable runs - 4ster - 02-17-2018, 05:21 PM
RE: Longer HP-IL cable runs - 4ster - 02-18-2018, 05:14 PM
RE: Longer HP-IL cable runs - rprosperi - 02-18-2018, 05:21 PM
RE: Longer HP-IL cable runs - rprosperi - 02-18-2018, 08:05 PM
RE: Longer HP-IL cable runs - 4ster - 02-21-2018, 03:39 AM
RE: Longer HP-IL cable runs - Harald - 02-21-2018, 10:28 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication