HP Forums / HP Calculators (and very old HP Computers) / HP Prime v / Public Beta Availiable - Win/Mac/Firmware [UPDATED]

Post Reply 
Public Beta Availiable - Win/Mac/Firmware [UPDATED]
11-22-2017, 09:55 PM (This post was last modified: 11-22-2017 10:12 PM by Tim Wessman.)
Post: #147
Tim Wessman Offline
Senior Member
 		Posts: 2,293
Joined: Dec 2013
RE: Public Beta Availiable - Win/Mac/Firmware [UPDATED]
Unplug it, leave it in that "recovery mode", close the connkit, connect to a *different* USB port, then open it.

Windows 10 sometimes gets stuck with old units and won't detect they are connected. If you don't hear the usb connection noise, just leave it 10 minutes and come back. It will most likely have connected by then. If you are trying to use a mac, it can't handle updating old units that are more then about a year old firmware wise.
TW

Although I work for HP, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Public Beta Availiable - Win/Mac/Firmware [UPDATED] - Tim Wessman - 11-22-2017 09:55 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication