41CL Self-Update

[Sylvain Cote]

(11-18-2017 12:41 PM)jwhsu Wrote:  To clarify. On the CL side, the MMU is activated and you used SERINI, TURBO, and BAUD to set up the CL for data transfer?

For YUPS on the 41CL to work, you do need to have YFNX (or YNFZ) mapped to a port, YUPS mapped to a port and the MMU active, but you do not need the SERINI/BAUD/TURBO functions.
YUPS functions CMOPEN/FLCHK?/CDBIMP/CDBEXP/FLUPD/CMLOSE handle the serial port setup and CL speed by themselves internally.
Sylvain