program execution speed as library vs variable HP50G

[snrowe]

(10-02-2017 05:48 AM)cyrille de brébisson Wrote:  Hello,

When running as a library, in which port is your library stored?

Also remember that the G series have more RAM than the S series, thus the GC is slower...

Cyrille

It was in port 3 on card 2. I just confirmed that it runs at normal speed from port 1 and 0 so it must be GC run from a covered port is much slower than a non covered port.

I had a loop that was displaying the time and free mem every loop, I could see the clock tick every second when running from the uncovered port and every ~5 seconds from the covered port.

Don't have my hp50G and 49G with me now but I'll try all the ports with those as well later this week.

Thanks for pointing me in the right direction.

Scott