newRPL on HP 39gs
|
05-14-2018, 01:42 PM
(This post was last modified: 05-15-2018 03:40 AM by RMollov.)
Post: #21
|
|||
|
|||
RE: newRPL on HP 39gs
Bad news. I did try to swap keys of the hp49g+ and HP39gs with no success. Pulled off their screen protectors. HP49g+ had no screws underneath and I moved to the HP39. Pulled it apart within a minute and found dozens of little screws I thought were holding the board to the base. Took them out, but the board was still solidly stuck to the bottom. Looks like those screws were driven into hollow white plastic heatstakes. At this point I gave up. Put it all back together, leaving one of the buzzer's leads unsoldered (it came off when I split the shelves.), so now HP39 is quiet.
I love RPL and would like to give newRPL a go. Now I'm thinking about making stickers for key legends. I took some pictures, if anyone is interested, I'll post them here. Cheers, |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)