HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP97 printer gear replacement

Post Reply 
HP97 printer gear replacement
08-25-2018, 04:51 PM
Post: #9
Tom V Offline
Junior Member
 		Posts: 2
Joined: Aug 2018
RE: HP97 printer gear replacement
Hi folks,

done.... printer works perfect!

I purchased from "GHW Modellbauversand" this part:

"Stirnrad Mod. 0,3 Messing - 30 Z"
Part number #753030
each 3,15 EUR

https://ghw-modellbau.de/product_info.ph...anguage=en

The gear fits perfect, only the hole is to small
I drilled the hole to 2,4mm (we have a lathe at work)
no further modifications required!

thanks to the forum for the great tip!!!
cheers!
Thomas
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP97 printer gear replacement - Hans-Peter - 11-14-2016, 09:06 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:33 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:37 PM
RE: HP97 printer gear replacement - Tom V - 08-21-2018, 05:25 PM
RE: HP97 printer gear replacement - Jlouis - 08-22-2018, 12:59 AM
RE: HP97 printer gear replacement - Tom V - 08-25-2018 04:51 PM
RE: HP97 printer gear replacement - pipesm - 12-09-2021, 06:31 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 11:08 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 09:07 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication