HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP97 printer gear replacement

Post Reply 
HP97 printer gear replacement
08-21-2018, 05:25 PM (This post was last modified: 08-25-2018 04:53 PM by Tom V.)
Post: #6
Tom V Offline
Junior Member
 		Posts: 2
Joined: Aug 2018
RE: HP97 printer gear replacement
Hi folks, hello Hans-Peter,

thanks for this valuable information!
Today I purchased new brass gears from the Modellbauershop (now it's https://www.ghw-modellbau.de/)

I hope I can finish the HP97 restoration next week

regards from Muelheim/Ruhr Germany
Thomas
cheers!
Thomas
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP97 printer gear replacement - Hans-Peter - 11-14-2016, 09:06 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:33 PM
RE: HP97 printer gear replacement - Jlouis - 11-15-2016, 02:37 PM
RE: HP97 printer gear replacement - Tom V - 08-21-2018 05:25 PM
RE: HP97 printer gear replacement - Jlouis - 08-22-2018, 12:59 AM
RE: HP97 printer gear replacement - Tom V - 08-25-2018, 04:51 PM
RE: HP97 printer gear replacement - pipesm - 12-09-2021, 06:31 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 11:08 PM
RE: HP97 printer gear replacement - teenix - 12-15-2021, 09:07 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication