Post Reply 
(sqrt(-2))^2
10-06-2016, 06:47 AM (This post was last modified: 10-06-2016 06:54 AM by retoa.)
Post: #8
RE: (sqrt(-2))^2
(10-06-2016 05:10 AM)parisse Wrote:  I would say it's a UI problem, since it works in algebraic mode. The CAS sees only algebraic input, 2d input is converted to algebraic outside the CAS.

I agree, the input changes from (sqrt(-2))^2 to sqrt((-2)^2) when you press enter, so the CAS evaluates sqrt((-2)^2).

But in home it works fine. Is there a difference between the 2D interpretation in home and CAS?

It is very useful to know that CAS only sees algebraic input.

Reto
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(sqrt(-2))^2 - retoa - 10-05-2016, 02:33 PM
RE: (sqrt(-2))^2 - toml_12953 - 10-05-2016, 03:01 PM
RE: (sqrt(-2))^2 - retoa - 10-05-2016, 03:04 PM
RE: (sqrt(-2))^2 - parisse - 10-05-2016, 07:13 PM
RE: (sqrt(-2))^2 - retoa - 10-05-2016, 09:24 PM
RE: (sqrt(-2))^2 - Tim Wessman - 10-05-2016, 10:37 PM
RE: (sqrt(-2))^2 - parisse - 10-06-2016, 05:10 AM
RE: (sqrt(-2))^2 - retoa - 10-06-2016 06:47 AM
RE: (sqrt(-2))^2 - Tim Wessman - 10-06-2016, 02:12 PM
RE: (sqrt(-2))^2 - parisse - 10-06-2016, 06:05 PM
RE: (sqrt(-2))^2 - John P - 10-06-2016, 07:26 PM
RE: (sqrt(-2))^2 - compsystems - 10-06-2016, 07:58 PM
RE: (sqrt(-2))^2 - compsystems - 10-06-2016, 04:01 PM
RE: (sqrt(-2))^2 - parisse - 10-06-2016, 08:19 PM
RE: (sqrt(-2))^2 - compsystems - 10-06-2016, 08:36 PM
RE: (sqrt(-2))^2 - parisse - 10-07-2016, 06:27 AM
RE: (sqrt(-2))^2 - compsystems - 10-08-2016, 03:38 AM



User(s) browsing this thread: 2 Guest(s)