Post Reply 
9114B disc drive vs 82161A tape drive
09-12-2016, 01:09 PM (This post was last modified: 09-12-2016 01:13 PM by 4ster.)
Post: #9
RE: 9114B disc drive vs 82161A tape drive
(09-12-2016 04:50 AM)hth Wrote:  
(09-11-2016 10:32 PM)4ster Wrote:  I've looked at the PIL-Box. I have gravitated toward mac (I do have an old PC running Win 2000) and have a poor personal history of figuring out communication between devices. I unsuccessfully installed WINE for running a Windows only device to PC application I wanted to use. Crossover may be easier to use. I was a fair hand running KERMIT between devices. If its not super simple I am usually stumped. Is there a "PIL-Box for Dummies" set of instructions for set up and use?

I have not used my PIL-box for a while, but last time I ran it on Mac OS X native. No Windows compatibility thingie is needed.

What you need (apart from the HPIL device emulation software on the host side) is a driver and then (optional) a configuration to improve performance.

Could you expand on this a little? I didn't do my research before purchasing Crossover from the MacWorld store yesterday. I should have figured out that Crossover needs the latest (or nearly latest) mac OS to run. Crossover would not instal on my old system. So the Crossover path is closed at the present time.

Garth, thanks for the useful tips on RS232 over IL, I'll give that a try.

Steve
In order of appearance: HP 41CV, CMT-MCGPS, HP 41CX, DM 41, DM 42
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 9114B disc drive vs 82161A tape drive - 4ster - 09-12-2016 01:09 PM



User(s) browsing this thread: 1 Guest(s)