FRAM71B

[Erwin]

(10-08-2016 06:21 PM)Sylvain Cote Wrote:  [...]
Yes, in my last setup proposal, I have reserved at the end a 64KB address space for bank switched modules.
In that space you can either map: (4 x 16KB ROM) or (2 x 32KB ROM) or (1 x 64KB ROM) or (2 x 16KB ROM + 1 x 32KB ROM)

(10-08-2016 06:59 AM)Erwin Wrote:  POKE "C2000","3E4D5D69718191A1BAC50D0" ??? that's not clear for me

First "C2000" should be "2C000"

Second, the configuration you are proposing is not good, the one you should propose is ...
Please take the time to read carefully the
FRAM71B User's Manual Page 14 section LCIM (Last Chip In Module)
and
Nathan article section "Electrical Behavior of Devices" on chips and modules

Sylvain

edit: typo

Hi Sylvain,

thank you, Dave and Rob for your patience and help not only with my typos in the POKE. Yes I tried to make a plan like your last proposal but forgot the address limit so there is 128KB instead of 144KB.

I'll try to study the basics in the next days and try to configure my calculator in this manner. Looks like that it takes more time to get in the mapping theme. Yours hints and examples will help me too. I will give feedback to the forum about the result.

best regards
Erwin