WP 34S --> WP 31S

[Eric Rechlin]

I use Inkscape for editing the SVG file. It's free and open source and not always the most user-friendly, but it seems both stable and capable.

I can't cut directly from the SVG files. I export them to PNG, then put the PNG file into the program that drives the cutter, and manually draw all the cut lines onto it. But despite calibrating, the cutter still doesn't cut in the right place, so with a new layout it takes a bunch of trial-and-error to get everything aligned right again.

I'll probably make some 31S overlays soon. If someone has an SVG already that will help out, otherwise I will make one from scratch like I did for the 30S a few weeks ago.