Post Reply 
Prime Factors in the ALPHA REG.
12-09-2015, 07:33 PM
Post: #9
RE: Prime Factors in the ALPHA REG.
(12-09-2015 06:29 PM)Dieter Wrote:  The [printer]? test command does not help much here as it does not test whether a printer is connected and ready or not. There is no equivalent to the 41/42 flags 21 and 55. Maybe all this can be improved in, err... "future projects". ;-)

Sorry, but the IR printer cannot talk back to the calculator so there is no chance to check if the printer is ready. The [printer]? test command just tells whether the correct firmware for printing is installed.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Prime Factors in the ALPHA REG. - fhub - 12-09-2015, 02:33 PM
RE: Prime Factors in the ALPHA REG. - fhub - 12-09-2015, 06:32 PM
RE: Prime Factors in the ALPHA REG. - fhub - 12-10-2015, 05:43 PM
RE: Prime Factors in the ALPHA REG. - fhub - 12-10-2015, 06:25 PM
RE: Prime Factors in the ALPHA REG. - Marcus von Cube - 12-09-2015 07:33 PM



User(s) browsing this thread: 1 Guest(s)