Post Reply 
RPL/2
08-13-2017, 02:12 PM (This post was last modified: 08-13-2017 03:02 PM by pier4r.)
Post: #17
RE: RPL/2
So, started to use the last version of the 4.0 release (because: Xp is the OS that I use for HP50g related stuff. Indeed newRPL 0.9 does not work, snort. So to be safe I normally take not the last version but the last version of the last release published when winXp was still widely used).

As said before, the work done is really a lot, congrats (I love people like you or Claudio that share with everyone).

I have Cygwin 2.5.2.

One small report, I am not sure it is fixed in the 4.1.x version. If the configure script does not found commands (like "patch") maybe it should fail to avoid messing up the installation?

edit: after like one hour of compilation. make fails due to "cmp" missing. Once again, would be nice to have a test at the start that verifies that needed commands are there, working, and if not, quits the installation with a message. (I am not sure this is present in 4.1.x but I would bet not)

(for those like me that wants to install the last cygwin on winXP: http://www.crouchingtigerhiddenfruitbat....chine.html )

also bugzilla (I know the workaround, but people may be pushed away):
[Image: IDQzGH7l.png]

Wikis are great, Contribute :)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RPL/2 - JKB - 09-18-2015, 09:09 AM
RE: RPL/2 - JKB - 11-26-2015, 12:50 PM
RE: RPL/2 - Thomas Klemm - 11-26-2015, 08:44 PM
RE: RPL/2 - JKB - 03-01-2016, 10:48 PM
RE: RPL/2 - JKB - 09-27-2016, 04:08 PM
RE: RPL/2 - compsystems - 09-27-2016, 07:54 PM
RE: RPL/2 - JKB - 09-28-2016, 08:25 AM
RE: RPL/2 - JKB - 10-12-2016, 08:10 AM
RE: RPL/2 - JKB - 06-28-2017, 09:24 AM
RE: RPL/2 - JKB - 07-31-2017, 12:23 PM
RE: RPL/2 - pier4r - 08-01-2017, 06:24 PM
RE: RPL/2 - JKB - 08-01-2017, 06:30 PM
RE: RPL/2 - pier4r - 08-01-2017, 09:33 PM
RE: RPL/2 - JKB - 08-01-2017, 09:48 PM
RE: RPL/2 - pier4r - 08-02-2017, 07:37 PM
RE: RPL/2 - JKB - 08-03-2017, 05:25 PM
RE: RPL/2 - pier4r - 08-13-2017 02:12 PM
RE: RPL/2 - JKB - 08-21-2017, 09:15 AM
RE: RPL/2 - pier4r - 08-21-2017, 09:30 AM
RE: RPL/2 - JKB - 08-21-2017, 09:54 AM
RE: RPL/2 - pier4r - 08-21-2017, 11:45 AM
RE: RPL/2 - pier4r - 08-27-2017, 11:44 AM
RE: RPL/2 - JKB - 08-30-2017, 06:56 AM
RE: RPL/2 - pier4r - 08-30-2017, 09:10 AM
RE: RPL/2 - JKB - 09-28-2017, 12:07 PM
RE: RPL/2 - pier4r - 09-28-2017, 01:58 PM
RE: RPL/2 - JKB - 10-11-2017, 04:21 PM
RE: RPL/2 - lost2 - 10-17-2017, 01:30 PM
RE: RPL/2 - JKB - 10-17-2017, 02:42 PM
RE: RPL/2 - lost2 - 10-18-2017, 02:48 PM
RE: RPL/2 - pier4r - 10-17-2017, 02:51 PM
RE: RPL/2 - JKB - 10-17-2017, 03:04 PM
RE: RPL/2 - JKB - 06-22-2018, 05:30 PM
RE: RPL/2 - compsystems - 06-22-2018, 06:53 PM
RE: RPL/2 - JKB - 06-22-2018, 09:50 PM
RE: RPL/2 - pier4r - 06-23-2018, 10:20 AM
RE: RPL/2 - JKB - 12-25-2018, 09:16 AM
RE: RPL/2 - edryer - 12-25-2018, 02:43 PM
RE: RPL/2 - pier4r - 12-26-2018, 02:39 PM
RE: RPL/2 - Thomas Klemm - 12-26-2018, 03:37 PM
RE: RPL/2 - pier4r - 12-26-2018, 03:47 PM
RE: RPL/2 - JKB - 12-26-2018, 04:58 PM
RE: RPL/2 - JKB - 12-28-2018, 08:32 AM
RE: RPL/2 - JKB - 02-03-2019, 01:49 PM
RE: RPL/2 - JKB - 02-03-2019, 01:50 PM
RE: RPL/2 - pier4r - 02-03-2019, 07:24 PM
RE: RPL/2 - JKB - 02-03-2019, 10:42 PM
RE: RPL/2 - compsystems - 11-20-2020, 07:28 PM
RE: RPL/2 - Sukiari - 11-21-2020, 08:39 AM
RE: RPL/2 - JKB - 12-19-2021, 10:00 AM



User(s) browsing this thread: 2 Guest(s)