HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Measuring 30b CPU speed reduction

Post Reply 
Measuring 30b CPU speed reduction
08-14-2015, 09:37 PM
Post: #21
Marcus von Cube Offline
Senior Member
 		Posts: 760
Joined: Dec 2013
RE: Measuring 30b CPU speed reduction
(08-14-2015 01:10 PM)Csaba Tizedes Wrote:  
(08-12-2015 04:55 PM)Marcus von Cube Wrote:  The RC oscillator runs...

OK, all of above posts are really interesting, but only one thing is missing: give me a number for 30b: from 100% to what percentage reduced the program running speed after 1 sec?! Smile Thnx!

Csaba

The exact figures must come from the authors of the 30b firmware but from what I have understood, the ratio should be some 38 MHz / 2 MHz. So the speed reduction factor is around 19.
Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Measuring 30b CPU speed reduction - Marcus von Cube - 08-14-2015 09:37 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication