User Function Key to cycle Number Format

[Didier Lachieze]

(06-15-2015 01:34 PM)rgallier Wrote:  I have not made it to the point that I understand programming on the HP Prime. This is a primarily feasibility question as to if it is possible to create a user program that could modify the GUI to add the ability to select the Entry Mode directly from the Quick Setting menu. If this is not possible then could a user program:

(1) Cycle through the Home Entry Modes (Textbook, Algebraic, RPN)

(2) If not (1) then swap between two modes (Textbook, RPN) *preferred*.

(3) Then assign the program to the [Shift][User][Enter] keystroke sequence *preferred*.

(4) If not (3) then assign to a softkey only visible after the [Shift][User] sequence.

TYIA - Roy

A user program is feasible, as a start point you can look at this Entry Mode switcher which does (1) and is assigned to the On key.