HP Forums / HP Calculators (and very old HP Computers) / General Forum v / SwissMicros DM-41

Post Reply 
SwissMicros DM-41
04-23-2015, 10:23 PM
Post: #8
Guenter Schink Offline
Senior Member
 		Posts: 547
Joined: Dec 2013
RE: SwissMicros DM-41
(04-23-2015 03:17 PM)Gerald H Wrote:  I can't get SST & BST to work, neither in Programme nor Catalogue.

Does anyone else have this problem?

I've re-purposed a DM-15 Silver Edition temporarely, and that doesn't show this behaviour. BST and SST take me through the program as well as through the Catalogue. The calc can't be switched off with the "ON" button. I have to XEQ "OFF".

Did you re-flash the calc to see if that makes any difference?

Günter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
SwissMicros DM-41 - dramsey - 04-20-2015, 12:29 AM
RE: SwissMicros DM-41 - rprosperi - 04-20-2015, 01:46 AM
RE: SwissMicros DM-41 - RMollov - 04-20-2015, 02:15 AM
RE: SwissMicros DM-41 - hpnut - 04-20-2015, 06:20 AM
RE: SwissMicros DM-41 - Namir - 04-20-2015, 07:58 AM
RE: SwissMicros DM-41 - Gerald H - 04-23-2015, 03:17 PM
RE: SwissMicros DM-41 - Guenter Schink - 04-23-2015 10:23 PM
RE: SwissMicros DM-41 - Gerald H - 04-24-2015, 08:36 AM
RE: SwissMicros DM-41 - Gerald H - 04-24-2015, 10:29 AM
RE: SwissMicros DM-41 - Massimo Gnerucci - 04-24-2015, 01:19 PM
RE: SwissMicros DM-41 - Jurgen Keller - 04-26-2015, 08:24 PM
RE: SwissMicros DM-41 - walter b - 04-26-2015, 08:34 PM
RE: SwissMicros DM-41 - Jurgen Keller - 04-26-2015, 09:07 PM
RE: SwissMicros DM-41 - Massimo Gnerucci - 04-26-2015, 08:48 PM
RE: SwissMicros DM-41 - Massimo Gnerucci - 04-26-2015, 08:54 PM
RE: SwissMicros DM-41 - aurelio - 05-10-2015, 04:14 PM
RE: SwissMicros DM-41 - Massimo Gnerucci - 05-10-2015, 04:34 PM
RE: SwissMicros DM-41 - RMollov - 05-10-2015, 11:13 PM
RE: SwissMicros DM-41 - hpnut - 05-11-2015, 12:44 AM
RE: SwissMicros DM-41 - Massimo Gnerucci - 05-11-2015, 05:54 AM
RE: SwissMicros DM-41 - Massimo Gnerucci - 05-11-2015, 05:52 AM
RE: SwissMicros DM-41 - Namir - 04-27-2015, 08:11 PM
RE: SwissMicros DM-41 - Dave Frederickson - 04-27-2015, 10:48 PM
RE: SwissMicros DM-41 - rprosperi - 04-28-2015, 03:26 AM
RE: SwissMicros DM-41 - hpnut - 05-10-2015, 01:40 PM
RE: SwissMicros DM-41 - RMollov - 05-10-2015, 03:42 PM
RE: SwissMicros DM-41 - Pekis - 05-13-2015, 02:56 PM
RE: SwissMicros DM-41 - HKG - 05-14-2015, 04:00 AM
RE: SwissMicros DM-41 - hpnut - 05-13-2015, 03:25 PM
RE: SwissMicros DM-41 - ElectroDuende - 06-25-2015, 06:47 AM
RE: SwissMicros DM-41 - TASP - 05-18-2015, 12:59 PM
RE: SwissMicros DM-41 - Klaus Sieber - 06-24-2015, 05:27 PM
RE: SwissMicros DM-41 - jimenezdorigo - 08-14-2015, 04:02 PM
RE: SwissMicros DM-41 - HokieKev - 08-16-2015, 03:04 PM
RE: SwissMicros DM-41 - DMaier - 08-17-2015, 04:43 AM
RE: SwissMicros DM-41 - HokieKev - 08-17-2015, 04:47 AM
RE: SwissMicros DM-41 - Massimo Gnerucci - 08-17-2015, 05:56 AM
RE: SwissMicros DM-41 - HokieKev - 08-17-2015, 01:23 PM
RE: SwissMicros DM-41 - Massimo Gnerucci - 08-17-2015, 01:49 PM
RE: SwissMicros DM-41 - HokieKev - 08-17-2015, 02:31 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication