Post Reply 
HP 75
03-04-2015, 03:15 PM
Post: #15
RE: HP 75
If the platen advances and the cartridge goes side to side, and there is no ink deposited no matter what cartridge is installed implies an electrical problem such as Garth noted.

If the contacts are OK, then it is further upstream; cabling, or driver electronics.

2speed HP41CX,int2XMEM+ZEN, HPIL+DEVEL, HPIL+X/IO, I/R, 82143, 82163, 82162 -25,35,45,55,65,67,70,80
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HP 75 - John W Kercheval - 02-14-2015, 12:57 PM
RE: HP 75 - Sylvain Cote - 02-14-2015, 02:37 PM
RE: HP 75 - John W Kercheval - 02-14-2015, 02:44 PM
RE: HP 75 - Sylvain Cote - 02-15-2015, 02:10 PM
RE: HP 75 - rprosperi - 02-15-2015, 03:50 PM
RE: HP 75 - Sylvain Cote - 02-15-2015, 05:32 PM
RE: HP 75 - John W Kercheval - 02-15-2015, 03:12 PM
RE: HP 75 - TASP - 03-04-2015, 01:18 AM
RE: HP 75 - Dave Frederickson - 03-04-2015, 01:40 AM
RE: HP 75 - TASP - 03-04-2015, 03:04 AM
RE: HP 75 - Dave Frederickson - 03-04-2015, 03:15 AM
RE: HP 75 - TASP - 03-04-2015, 05:00 AM
RE: HP 75 - Garth Wilson - 03-04-2015, 06:35 AM
RE: HP 75 - Paul Berger (Canada) - 03-04-2015, 12:33 PM
RE: HP 75 - TASP - 03-04-2015 03:15 PM
RE: HP 75 - Dave Frederickson - 03-04-2015, 03:39 PM
RE: HP 75 - TASP - 03-04-2015, 04:35 PM
RE: HP 75 - Garth Wilson - 03-04-2015, 08:02 PM
RE: HP 75 - TASP - 03-04-2015, 09:05 PM
RE: HP 75 - Dave Frederickson - 03-04-2015, 09:30 PM



User(s) browsing this thread: 1 Guest(s)