Barcode -> .raw file project ---- help requested

[Ángel Martin]

(03-04-2015 01:28 PM)Sylvain Cote Wrote:  There is 4 entries in the FAT of the JARRETXF.ROM that is corrupted.
You see it in the following list and when you do a CAT 2.

ROM Filename : JARRETXF.ROM
------------------hex---dec----------------
XROM : $011 017
# Functions : $030 048
ROM Name : -JARRET XF
Pause Entry : $000
Program Entry : $000
Sleep Entry : $000
OFF Entry : $000
Service Entry : $000
ON Entry : $000
MemLost Entry : $000
ROM Revision : BO-OK
Checksum : $222 CHECKSUM NOT GOOD, should be $30F
NOPs Counted : 132

-XROM----ADDR--FUNCTION --------------
017.00 AFF3 -JARRET_XF MCode XROM 17.00 "-JARRET XF"
...
017.12 AAE4 "INTEG UCode XROM 17.12 "INTEG"
017.13 A6F9 " UCode XROM 17.13 function outside this page
017.14 A16D "MKX UCode XROM 17.14 "MKX"
...
017.44 AF82 "JND UCode XROM 17.44 "JND"
017.45 A405 " UCode XROM 17.45 function outside this page
017.46 A52E " UCode XROM 17.46 function outside this page
017.47 A514 " UCode XROM 17.47 function outside this page

Hi Sylvain, that's strange - I don't see any missing or corrupt entry in the FAT. It may be that you have only loaded the lower 4k page? The JARRET_APPS module is an 8k, so both the lower and the upper pages need to be plugged in contiguous blocks.

Can you check and let us know?

Cheers,
ÁM