Post Reply 
[FRAM71] Pre-Production Batch
10-04-2016, 08:28 PM
Post: #172
RE: [FRAM71] Pre-Production Batch
(05-08-2015 01:44 AM)Dave Frederickson Wrote:  
(05-08-2015 12:03 AM)Christoph Giesselink Wrote:  I personally use a modified version of JFG's alifhdr to convert a DOS or UNIX style text file into a LIF1 text file with a 32byte LIF text file header ("alifhdr input_file LIF_file /T").

The resulting LIF_file then can be directly transferred with the ILDoslink device to a HP71 ("COPY :DOSLINK").

Thanks go to Sylvain and Bob for the ROM images. Special thanks to J-F Garnier for the Diag ROM image and many of the EPROM images.

Dave

Hallo,

I fiddle around to prepare my FRAM71B. I have a custom Eprom (64k) with a modified MathROM and the JPC LEX. I want to transfer the MathROM part on my Harddisk using PYILPER and the PILBOX and then back on the FRAM71B. I'm on a MAC so the solutions in this tread are not possible for me. I have the FRAM71B installed and started to config the first steps. So I could not find examples on the board for copying ROM to my hard disc I tried it with the document for ROMCOPY. The SHOWPORT gave me following result:
PHP Code:
0.05   16384  2
1      65536  2
0       4094  0
0.01    4094  0
0.02    4094  0
0.03    4094  0
5      32768  0 
I prepared a new LIF-file on my hard disc and tried to transfer the image from the Eprom with
PHP Code:
ROMCOPY :PORT(1TO FILE:HRDIVE1 
It ends in an error. It looks like that I misunderstood the syntax in the ROMCOPY document. Are there any helpful hands out there?
The descriptions I found on the board are only in the reverse way, cause the ROMs available for download :-)

Thank you
Erwin
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ROM Images - Dave Frederickson - 12-10-2014, 03:51 AM
IRAM vs ROM - Dave Frederickson - 12-13-2014, 06:36 PM
ROMCOPY - Dave Frederickson - 12-20-2014, 08:59 PM
[FRAM71] Bankswitching? - Hans Brueggemann - 02-07-2015, 06:55 PM
v430 beta - Dave Frederickson - 02-16-2015, 06:09 AM
RE: [FRAM71] Pre-Production Batch - cruff - 02-11-2015, 11:45 PM
v430 beta - Dave Frederickson - 02-17-2015, 05:14 AM
v430 beta - Dave Frederickson - 02-27-2015, 05:20 AM
1MByte FRAM71 - Dave Frederickson - 03-14-2015, 09:18 PM
RE: [FRAM71] Pre-Production Batch - Gene - 03-15-2015, 02:04 AM
V501 Firmware woes - Hans Brueggemann - 04-23-2015, 07:12 PM
Eagerly awaiting mine - cruff - 04-24-2015, 12:40 AM
RE: [FRAM71] Pre-Production Batch - cruff - 04-24-2015, 12:53 PM
Received my FRAM71 today! - cruff - 04-25-2015, 07:03 PM
RE: [FRAM71] Pre-Production Batch - cruff - 04-26-2015, 12:27 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016 08:28 PM
MEMBUF - Dave Frederickson - 05-13-2015, 02:50 AM
FRAM71 V502 - Hans Brueggemann - 05-16-2015, 04:02 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 01-02-2016, 08:13 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 02:10 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 03:47 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-05-2015, 09:44 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-08-2015, 07:13 AM
FlashPRO - Dave Frederickson - 06-11-2015, 03:42 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-13-2015, 12:04 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-15-2015, 11:22 PM
Blinkin' Lights - Dave Frederickson - 07-15-2015, 03:07 AM
FRAM71 LED - Hans Brueggemann - 07-16-2015, 11:47 AM
RE: [FRAM71] Pre-Production Batch - Andres - 01-25-2016, 10:40 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 08:46 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 09:04 PM



User(s) browsing this thread: 2 Guest(s)