Post Reply 
[FRAM71] Pre-Production Batch
07-17-2015, 01:59 AM (This post was last modified: 07-17-2015 02:00 AM by Egan Ford.)
Post: #155
RE: [FRAM71] Pre-Production Batch
I'm finally getting some time to try to max out my FRAM71 config. I've read the manual multiple times as well as this thread. Please tell me if I've got this right.

I've removed all my ROMs but the 41 Translator (in port 1), I don't see any reason to remove it, plus I'm missing a port cover. I also have HP-IL B installed.

VER$:
Code:

HP71:2CDCC HPIL:1B FTH41:1A EDT:A

So my max available RAM is: 512 - 64 (SYSROM) - 32 (BASE RAM address space) - 48 (41 Translator) - 16 (HPIL) = 352 + 16 (base memory)

However I'm only able get 312 + 16

Code:

\POKE "2C000","939495969798999A9BAC000000000000"
>SHOW PORT
0.05  16384  2
1     16384  2
0      4096  0
0.01   4096  0
0.02   4096  0
0.03   4096  0
5     32768  0
5.01  32768  0
5.02  32768  0
5.03  32768  0
5.04  32768  0
5.05  32768  0
5.06  32768  0
5.07  32768  0
5.08  32768  0
5.09  16384  0
>MEM
 328085

Anything larger reports WRN: errors. What am I missing here? Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ROM Images - Dave Frederickson - 12-10-2014, 03:51 AM
IRAM vs ROM - Dave Frederickson - 12-13-2014, 06:36 PM
ROMCOPY - Dave Frederickson - 12-20-2014, 08:59 PM
[FRAM71] Bankswitching? - Hans Brueggemann - 02-07-2015, 06:55 PM
v430 beta - Dave Frederickson - 02-16-2015, 06:09 AM
RE: [FRAM71] Pre-Production Batch - cruff - 02-11-2015, 11:45 PM
v430 beta - Dave Frederickson - 02-17-2015, 05:14 AM
v430 beta - Dave Frederickson - 02-27-2015, 05:20 AM
1MByte FRAM71 - Dave Frederickson - 03-14-2015, 09:18 PM
RE: [FRAM71] Pre-Production Batch - Gene - 03-15-2015, 02:04 AM
V501 Firmware woes - Hans Brueggemann - 04-23-2015, 07:12 PM
Eagerly awaiting mine - cruff - 04-24-2015, 12:40 AM
RE: [FRAM71] Pre-Production Batch - cruff - 04-24-2015, 12:53 PM
Received my FRAM71 today! - cruff - 04-25-2015, 07:03 PM
RE: [FRAM71] Pre-Production Batch - cruff - 04-26-2015, 12:27 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 08:28 PM
MEMBUF - Dave Frederickson - 05-13-2015, 02:50 AM
FRAM71 V502 - Hans Brueggemann - 05-16-2015, 04:02 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 01-02-2016, 08:13 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 02:10 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-03-2015, 03:47 PM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-05-2015, 09:44 AM
RE: [FRAM71] Pre-Production Batch - Oulan - 06-08-2015, 07:13 AM
FlashPRO - Dave Frederickson - 06-11-2015, 03:42 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-13-2015, 12:04 PM
RE: [FRAM71] Pre-Production Batch - cruff - 06-15-2015, 11:22 PM
Blinkin' Lights - Dave Frederickson - 07-15-2015, 03:07 AM
FRAM71 LED - Hans Brueggemann - 07-16-2015, 11:47 AM
RE: [FRAM71] Pre-Production Batch - Egan Ford - 07-17-2015 01:59 AM
RE: [FRAM71] Pre-Production Batch - Andres - 01-25-2016, 10:40 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 08:46 PM
RE: [FRAM71] Pre-Production Batch - Erwin - 10-04-2016, 09:04 PM



User(s) browsing this thread: 1 Guest(s)