Post Reply 
[WP-34S] Cable and flashing options for Mac users
01-21-2015, 03:06 PM (This post was last modified: 01-21-2015 03:07 PM by John Galt.)
Post: #47
RE: [WP-34S] Cable and flashing options for Mac users
Something like this?

Code:
john@ john-VirtualBox:~/.wine/dosdevices$ ls
c:  d::  z:
john@ john-VirtualBox:~/.wine/dosdevices$ sudo ln -s com1 /dev/ttyUSB0
[sudo] password for john: 
john@ john-VirtualBox:~/.wine/dosdevices$ ls
c:  d::  z:
john@ john-VirtualBox:~/.wine/dosdevices$ cd /dev
john@ john-VirtualBox:/dev$ ls ttyUSB0
ttyUSB0
john@ john-VirtualBox:/dev$

I have no idea if that's correct. I also downloaded and ran Prolific's Windows Driver Installer Setup Program here: http://prolificusa.com/pl-2303hx-drivers/

The driver installation appears to have finished successfully, installing something... somewhere... but I have no idea where drivers are supposed to reside on a Windows system.

The latest roadblock is that MySamBa still shows no ports to choose from - its "connect to" dropdown list is empty. Should "com1" now appear under dosdevices?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [WP-34S] Cable and flashing options for Mac users - John Galt - 01-21-2015 03:06 PM



User(s) browsing this thread: 1 Guest(s)