HP Forums / HP Calculators (and very old HP Computers) / General Forum v / Eprom Modules for the HP 75

Post Reply 
Eprom Modules for the HP 75
10-09-2014, 01:45 AM (This post was last modified: 10-09-2014 02:27 AM by Paul Berger (Canada).)
Post: #4
Paul Berger (Canada) Offline
Senior Member
 		Posts: 546
Joined: Dec 2013
RE: Eprom Modules for the HP 75
Sorry that connector is 0.1 pitch that will not work, the pin spacing is slightly larger that that as I mentioned in a previous post and it is just enough that they will not work. I sure you have some connector there that is 0.1 pitch, as they are very common, that you can compare to. The connector for the 8K memory expansion is 0.1 pitch.
Take a look at the picture I just uploaded I think this will be pretty clear, Pictures
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Eprom Modules for the HP 75 - Paul Berger (Canada) - 10-09-2014 01:45 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication