HP-25C Eumulator

[rprosperi]

(04-20-2017 05:06 PM)Gerson W. Barbosa Wrote:  ...but I'd like the display mode being kept. Is it preserved on the real HP-25C?

No, after power-off/power-on, the 25C comes up in FIX 2 mode.

I suppose the thinking was that if you shut it off you are most likely done with your current problem, and then when going back to the 25C for the next problem, you may (or even likely will) prefer to use different display settings.

Since the 25C was derived from the existing 25 f/w, they no doubt didn't want to have to change the display logic settings to add storage into NVR, so would have come up with some logic like the above to explain why it's not saved.