HP Forums / HP Calculators (and very old HP Computers) / General Forum v / HP-71B Startup Time - ROM Differences

Post Reply 
HP-71B Startup Time - ROM Differences
09-09-2014, 12:05 AM (This post was last modified: 09-09-2014 12:28 AM by Geoff Quickfall.)
Post: #2
Geoff Quickfall Offline
Senior Member
 		Posts: 782
Joined: Dec 2013
RE: HP-71B Startup Time - ROM Differences
I know you said off io when loop is not connected.

I have the same version with 3; 32k modules and the math. Startup is almost instant to the cursor and is the same on my other 5 machines of differing versions.

Have you tried executing the OFF IO command, then check the startup. IO can be on even when a loop is NONEXISTANT and mine then exhibits the slow start if I had not selected OFF IO after using the tape deck, ink jet printer, disc drive...

Geoff
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP-71B Startup Time - ROM Differences - Geoff Quickfall - 09-09-2014 12:05 AM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication